Sullivan-Palatek SP20 User Manual Download Page 2

Page: 2 / 117

DOCUMENT INFORMATION:

Revision: 00

CONTACT INFORMATION:

Sullivan-Palatek, Inc.

1201 West US Highway 20

Michigan City, IN 46360

Tel: 219-874-2497

Fax: 219-872-5043

Toll Free: 800-438-6203

Website: www.sullivanpalatek.com

RECORD KEEPING:

Record the model and serial number of the compressor for

future reference when contacting the factory for service or

parts.

Model Number:

Serial Number:

DISCLAIMER:

Although this manual is checked for conformity with the

machines described, we cannot guarantee that all errors will

be excluded. Necessary corrections will be made in future

editions of this manual. This manual is subject to change

without notice.

REVISION HISTORY:

DATE

SECTION(S)

DESCRIPTION

2014-07-07

---

Released for publication

Summary of Contents for SP20






















































































































Search results

Summary of Contents for SP20

Reviews:

Related manuals for SP20

Brands by name

Popular brands

Sullivan-Palatek SP20, User Manual

Search results

Summary of Contents for SP20

Reviews:

Related manuals for SP20

Brands by name

Popular brands