Suisei EFP-LC, Supplementary Manual, Page: 8 / 24

（
8/24
）
EFP-LC TypeE Supplementary manual
(For RX66T)
7.3
Baudrate set command
The command which changes the baud rate to access.
Format : S=xxx
xxx : (Valid until 1-256
）
Description example :
S=3
；
500kBps is used for access with MCU.
S
；
Error ( no argument )
Detail:
RX family is in communication at 9600bps when accessing data read, verify, and writing.
You can shorten the processing time to change the baud rate to access. The value to be set, please refer to Table7.1-
Table7.2.
Please description after the MCU set command (T command ) This command is.
Note:
After setting, changing does MCU setting (T command) or works at the baud rate that set until cut the power supply of
the main body of EFP-LC.
Table7.1 Setting baud rate(1)
Setting Baud rate Setting Baud rate Setting Baud rate Setting Baud rate
S=1 1500000 S=25 60000 S=49 30612 S=73 20547
S=2 750000 S=26 57692 S=50 30000 S=74 20270
S=3 500000 S=27 55555 S=51 29411 S=75 20000
S=4 375000 S=28 53571 S=52 28846 S=76 19736
S=5 300000 S=29 51724 S=53 28301 S=77 19480
S=6 250000 S=30 50000 S=54 27777 S=78 19230
S=7 214285 S=31 48387 S=55 27272 S=79 18987
S=8 187500 S=32 46875 S=56 26785 S=80 18750
S=9 166666 S=33 45454 S=57 26315 S=81 18518
S=10 150000 S=34 44117 S=58 25862 S=82 18292
S=11 136363 S=35 42857 S=59 25423 S=83 18072
S=12 125000 S=36 41666 S=60 25000 S=84 17857
S=13 115384 S=37 40540 S=61 24590 S=85 17647
S=14 107142 S=38 39473 S=62 24193 S=86 17441
S=15 100000 S=39 38461 S=63 23809 S=87 17241
S=16 93750 S=40 37500 S=64 23437 S=88 17045
S=17 88235 S=41 36585 S=65 23076 S=89 16853
S=18 83333 S=42 35714 S=66 22727 S=90 16666
S=19 78947 S=43 34883 S=67 22388 S=91 16483
S=20 75000 S=44 34090 S=68 22058 S=92 16304
S=21 71428 S=45 33333 S=69 21739 S=93 16129
S=22 68181 S=46 32608 S=70 21428 S=94 15957
S=23 65217 S=47 31914 S=71 21126 S=95 15789
S=24 62500 S=48 31250 S=72 20833 S=96 15625
unit
［
bps
］