1.1 g
enerAl
notes
on
sAfety
This operation manual is applicable for the machine LSA
70.
The machine may only be handled by personnel
who are qualified.
1.2 u
se
of
the
mAchine
for
PurPoses
for
which
it
is
intended
The tool is designed for grinding, milling, and deburring
metal, stone, and plastic with burrs and abrasives.
1.3 i
ncorrect
use
All uses other than those described under section
1.2 are regarded as incorrect use and are there-
fore not admissible.
1.4 ec
declArAtion
of
conformity
Translations of the «EG-Koformitätserklärung (Original)».
Otto Suhner GmbH, Trottäcker 50, D-79713 Bad Säckin-
gen, hereby declares under sole responsibility that the
product with the serial or batch no. (see reverse side) com-
plies with the requirements under the Directive 2006/42/
EG. Applied standards: EN ISO 12100, EN ISO 11148.
Document Agent: T. Fischer. D-Bad Säckingen, 10/2019.
T. Fischer/Managing Division manager
2. C
ommISSIoNINg
2.1 P
rior
to
tAKing
the
mAchine
into
serVice
Use oiled compressed air (see also air quality un-
der section 2.3). Observe national regulations.
2.1.1 m
ount
the
suPPly
hose
Screw connection nipple into the valve body, invert suply
hose through connection nipple and fix it with hose clamp
(available as an accessory).
1. N
oTES
oN
S
aFETy
2.2 t
AKing
the
mAchine
into
serVice
Before connecting the tool to the com-
pressed air supply set the sleeve to the
«OFF» position! The tool may be switched
on only when the attachment have been installed correct-
ly.
2.2.1 t
urn
on
/t
urn
off
Turning on the machine by moving the sleeve in the ar-
row direction. Off by moving the sleeve in the opposite
direction.
Before cutting off the compressed air supply, al-
ways set the machine to the «OFF» position so
that the tool cannot be reactivated inadvertently.
2.3 r
Ating
dAtA
Pressure
max. 6.3bar
Power output
75W
Air consumption full load EN ISO 15744
0.20m
3
/min
Air consumption at idling EN ISO 15744
0.22m
3
/min
Setting oiler idle
about 1 drops/min
No-load speed
92’000min
-1
Max. wheel diameter
10mm
Max. chuck diameter
3mm / 1/8”
Sound pressure level EN ISO 15744 81dB(A), K=3dB(A)
Noise emission level EN ISO 15744 92dB(A), K=3dB(A)
Vibration EN ISO 28927-12
1.69m/
s
2, K=0.66m/s
2
Air quality DIN ISO 8573-1
2/4/4
Weight 0.160kg
2.4 o
PerAting
conditions
Temperature range during operation: 0 to +40°C
Relative air humidity: 95% at +10°C not condensed
3.
haNDLINg
/ o
PERaTIoN
3.1 t
ools
Use only clean tools!
16
