26
27
Please always notice the battery changes and turn back according to the
reality.
You should push the multi-functional switch once to exit the turn back
reminder interface.
8. Turn Back Battery Reminder
The user can set the remaining battery value to remind turning back, and when
the remaining battery is less than the setting value, the device will send out
warnings.
PLEASE
TURN BACK
Remaining charge value
setting by mobile phone
A prompt pops up when the
charge is less than the setting value
30%
20%
40%
50%
60%
关闭
确定
3. Shake fully and clean the Navbow
+
body to remove any foreign matter attached to it.
4. Wipe the surface of the device with a clean, soft, dust-free cloth. Make sure that
the body and battery have no water beads, and place them in a cool, dry place
to dry naturally.
Cleaning after Use
1
Maintenance
1. After each use, Navbow
+
should be completely immersed in clear water for 30
minutes to prevent residue from seawater or foreign matter. Besides, attentions
should be paid to the following.
2. For deep cleaning, please click the “self-cleaning” function on your mobile phone
App. Then the scooter will automatically run. You should immerse the Navbow
+
scooter completely in fresh water.
The battery must be installed during cleaning.
Use clean water.
Immerse in water for more than 20 minutes.
Do not add chemical cleaners such as laundry detergents or cleaning agent
to the water.
When the Navbow
+
is immersed in water, some bubbles may emerge from
holes on its body. This is normal.
Never use a hair dryer or drying apparatus to dry it.
Never spray the battery contact or the battery compartment of the host with
water.
Be careful to prevent the water from being splashed on your body.
