16
17
1. Install the counterweight support and column according to photos.
2. The device should be completely sunk in water and the air should be fully vented
when one counterweight column is added. Inspect whether the buoyancy condition
is up to expectation and if not, continue adding counterweight columns until
expectations are met.
1. Whether there is defect or damage on the device appearance and whether the
propeller is broken and battery sealing gasket is damaged.
2. Whether the battery functions normally and has been fully charged.
3. Whether the buttons are functional.
4. Whether the display screen functions.
5. Whether the device has been calibrated.
6. Whether the relevant settings have been finished on SublueGo App.
7. Whether the depth, temperature, course and all other fundamental and spare
digital and mechanical instruments show a correct and uniform reading.
Inspection before Use
1
Flotation Regulation
2
Device Usage
The device buoyancy may vary as water environment changes. If you need to increase
the buoyancy and regulate the device to the best condition, you can do as follows.
Please make sure regulate buoyancy in safe water environment to prevent the
device from slipping out of the hand and sinking.
The device may be negative in buoyancy after regulation, and the machine will
sink when the device is released.
Install the counterweight support secondly
Install the counterweight column first
1. Use the product over 100km away from the place where last calibration was
successful.
2. Regions where elevations have obvious changes.
3. Over 30 days of non-use.
While wearing the anti-lost lanyard, in order to protect your personal safety in
case of emergency, the device can be separated from you by quick release.
In calibration setting, the underwater scooter compass and depth sensor will be
calibrated at the same time.
If one of the following situations happens, please calibrate the device:
Wear and Emergency Release of Anti-lost Lanyard
3
Device Calibration
4
Wearing is finished
Quick release
Calibration steps
1. Choose an open area.
2. Turn on SublueGo App and connect it to your underwater scooter.
