24
25
Synchronize the exercise data recorded in the underwater scooter to your mobile
phone and edit and generate your personal underwater exercise journals.
Enter the journal synchronization page from SublueGo
console.
Choose “synchronization” which will display the journal list
saved in your device. You can select journals that you want
to download and then press “synchronization”. Then, the
device will transmit data to your mobile phone.
When RAM of underwater scooter is completely stored,
the device will automatically delete the earliest data to
save later ones. Please synchronize data in time.
1. Synchronization of Underwater Exercise Journal Data
When this function is set to start, the device will be locked. Though you can power
the device on, you cannot operate it. Meanwhile, the screen will display the photo
of “safety lock start”. You can use the device when the function is lifted.
If you are worried that the device is incorrectly operated or children use it
without supervision, you are suggested to use this function.
3. Safety Lock
Geomagnetic declination setting improves the accuracy of compass. Therefore,
before you use the product, especially when you have changed the use area of
the product, you should obtain local geomagnetic declination from reliable
sources and set it in SublueGo.
Note that the magnetic declination value will be positive or negative!
2. Geomagnetic Declination Setting
* Magnetic declination refers to the angle between the magnetic meridian and the
geographical meridian at any point on the earth's surface. It is different in various places, while
it is also different even in the same place with different time. If the magnetic needle points to
the north pole and heads towards the east, then the angle of magnetic declination is positive,
and if it heads towards the west, then it is negative.
Please use fresh water for cleaning. During the operation of self-cleaning
function, the propeller will move, so please be cautious!
With this function, the product can be deeply cleaned and sea water remaining in
the product will be also removed.
4. Self-cleaning
Self-cleaning will last for 3 minutes.
The user can set the depth value that he/she expects to be noticed through this
function, and when the depth exceeds your setting value, the device will send out
warnings.
7. Depth Pre-warning Setting
When this function is started and charge is less than 30%, the device will send out
buzzer warnings.
5. Low Battery Buzzer Reminder
Water environment in various regions causes depth to be displayed in error.
Please confirm that the depth data and spare digital or mechanical
instruments show the same reading before use.
Set the function according to the water environment (fresh water or sea water) in
which the product is applied to improve the accuracy of depth display.
6. Fresh Water/Sea Water
When an alarm is triggered a shutdown warning is displayed. Wait five seconds
and press the multi-function dial once to cancel the warning.
WARNING
07.0
m
Depth value setting by mobile phone
Depth warning interface
7m
6m
5m
8m
9m
10m
关闭
确定
