12
13
Device in calibration
CALIBRATING
Device calibration
succeeded
CALIBRATION
SUCCESSFUL
Device calibration
failed
CALIBRATION
FAILED
Safety lock
Firmware updating
When entering safety lock mode, you
cannot operate the device. You should
unlock it in App before re-operating the
device
Under self-cleaning
When self-cleaning mode is started, it
will operate for 3 minutes
In case of any malfunction warning, you should immediately stop use and contact
Sublue after-sales service center or authorized service organizations for support in
time.
Permanent damages will be made if the product is used beyond its depth limit,
please do not do that.
Please always notice the battery changes and make a safe return.
Please use fresh water rather than sea water for self-cleaning.
light
light
light
light
light
Flash
Connect the charger to the AC supply (100-240V AC, 50/60Hz).
2
Battery charging
Make sure to fully charge the battery before using it for the first time.
It takes about less than 2 hours to fully charge the battery with fast charger
adapters.
The battery is a high-performance lithium-ion battery with a capacity of 10,670 mAh,
designed specifically for the Navbow series underwater scooter. It features
high-performance cells that provide sufficient power for the Navbow
+
.
Introduction to Battery
1
Battery
Please carefully read and strictly follow the requirements in the User Manual
and those on the battery surface sticker. The user shall undertake all
consequences if he/she fails to follow the usage requirements.
The battery must be charged by the dedicated charger supplied by Navbow
+
.
Sublue is not responsible for any consequences of charging through unofficial
Navbow
+
chargers (including other Sublue models).
Charging
Fully charged
Socket
Bottom of charging stand
Charging stand and battery
Adapter
