SubC Imaging Rayfin, User Manual, Page: 40 / 66

40
Available devices are listed at the bottom of the screen under
Available Device Types and Available Input Types.
Select the device you would like to configure and drag it to the
Aux0 or Aux1 slot. You can also select a device from the
drop-down menu.
Some devices have selectable Baud rates.
The Rayfin will start up and load the previously configured
device that was set.
SubC devices (LED and lasers) auto configure once selected.
See these pages for Pan-tilt unit information.
NMEA output devices can be connected to the Aux ports as
Serial Controllers and the Rayfin will log NMEA formatted data.
See more about this in section
NMEA Data Logging .
SubC can add more devices for compatibility on request.
Controlling devices from Aux Ports
Updated:
2021-06-23
PM: CC
Software: AR
Quality: AW