SubC Imaging Rayfin, User Manual, Page: 25 / 66

To set up serial communication, first configure your Aux port
as a Serial Controller. This can be done by first connecting the
camera over Ethernet on your bench setup.
A Rayfin Aux Serial
Controller defaults to 9600 baud.
To connect to serial control from the control software:
●
Under ComPort, choose the option Disconnect/Refresh
from the dropdown menu
●
Select your ComPort from the list
●
Select your Baud Rate from the dropdown menu
Note:
^
If the connection is not working, the selected baud rate may be
incorrect or the Rx and Tx pins may be reversed in your cable.
25
Serial Communication
Updated:
2020-11-03
PM: CC
Software: AR
Quality: AW