Black plate (146,1)
一
般
Model "A1270GE-A" EDITED: 2016/ 3/ 10
3-12
Instruments and controls/Meters and gauges
.
The gauge indicates only an approx-
imate amount of fuel remaining in the
tank. Use this indication only as a
guide.
.
If you refuel while the ignition switch
is in the
“
ON
”
position, the fuel gauge
may not indicate the correct amount of
the fuel in the fuel tank.
.
If the refuel amount is less than
approximately 15 liters (4.0 US gal, 3.3
Imp gal), it may take some time until the
fuel gauge indication stabilizes.
&
Temperature gauge
1)
Normal operating range
The temperature gauge shows engine
coolant temperature when the ignition
switch is in the
“
ON
”
position.
The coolant temperature will vary in
accordance with the outside temperature
and driving conditions.
We recommend that you drive moderately
until the pointer of the temperature gauge
reaches near the middle of the range.
Engine operation is optimum with the
engine coolant at this temperature range
and high revving operation when the
engine is not warmed up enough should
be avoided.
CAUTION
If the pointer exceeds the normal
operating range, safely stop the
vehicle as soon as possible.
Refer to
&
ECO gauge
The unit displayed varies depending on the
models.
The ECO gauge shows the difference
between the current rate of fuel consump-
tion and the average rate of fuel consump-
tion since the trip meter was last reset.
The ECO gauge indicates the current fuel
efficiency as shown in the following chart.
