Subaru WRX-STI, Owner'S Manual

Page: 113 / 578

Black plate (117,1)
一 般
Model "A1270GE-A" EDITED: 2016/ 3/ 10
PIN Code Access (models
with
“
keyless access with
push-button start system
”
)
1) Trunk lid opener button
When all doors are locked, you can unlock
them without a key by operating the trunk
lid opener button.
You need to register a PIN code to your
vehicle before using this function.
NOTE
PIN Code Access will be helpful if the
key is accidentally left in the vehicle. It
is recommended that a 5-digit security
code (PIN code) is registered.
&
Registering a PIN code
!
Preparation
1. Turn off the ignition switch.
2. Close all doors and the trunk lid.
3. Press and hold the
“ ”
button on the
access key. Then all doors and the trunk
lid will be locked.
4. While pressing the
“ ”
button, press
and hold the trunk lid opener button within
5 seconds after completing step 3.
5. Press and hold the above buttons for
more than 5 seconds. Then a chirp will
sound.
6. Release the
“ ”
button and the trunk
lid opener button.
7. Press the
“ ”
button on the access key
while the chirp sounds. Then the chirp will
stop and the preparation is complete.
NOTE
If you do not press the
“ ”
button on
the access key, the chirp will sound for
30 seconds. In this case, the prepara-
tion for registering a PIN code does not
complete even if the chirp stops.
!
Registration
For example, to register
“
32468
”
as the
PIN code, perform the following proce-
dure.
1. Press the trunk lid opener button three
times.
2. After a buzzer (ding) sounds once,
press the trunk lid opener button twice.
3. After a buzzer (ding) sounds once,
press the trunk lid opener button four
times.
4. After a buzzer (ding) sounds once,
press the trunk lid opener button six times.
5. After a buzzer (ding) sounds once,
press the trunk lid opener button eight
times.
6. Perform steps 1 to 5 again within
approximately 30 seconds after the buz-
zer starts sounding intermittently.
7. All doors and the trunk lid that has
been unlocked will be locked. Then the
PIN code will be registered.
NOTE
.
To register
“
0
”
as a PIN code, press
the trunk lid opener button on the trunk
lid ten times.
.
Change the PIN code frequently to
protect your vehicle from theft.
.
If you have lent your vehicle to
Keys and doors/PIN Code Access (models with
“
keyless access with push
–
button start system
”
)
2-17
–
CONTINUED
–
2