Black plate (368,1)
一
般
Model "A1270GE-A" EDITED: 2016/ 3/ 10
7-10
Starting and operating/Starting and stopping engine (models with push
–
button start system)
.
The engine start procedures may
not function depending on the radio
wave conditions around the vehicle. In
such a case, refer to
“
.
If the vehicle battery is discharged,
the steering cannot be unlocked.
Charge the battery.
.
After the engine starts, the engine
speed will be kept high until the engine
has warmed up sufficiently.
Left-hand drive models
Right-hand drive models
1)
Operation indicator
2)
Push-button ignition switch
When the push-button ignition switch is
pressed while depressing the clutch pedal
(MT models)/brake pedal (CVT models),
the engine will start. The start procedure
of the engine is as follows.
!
MT models
1. Carry the access key, and sit in the
driver
’
s seat.
2. Apply the parking brake.
3. Shift the shift lever in neutral.
4. Depress the brake pedal.
5. Depress the clutch pedal until the
indicator on the push-button ignition
switch turns green.
6. While depressing the clutch pedal,
press the push-button ignition switch.
NOTE
In case the engine does not start by the
normal engine start procedure, move
the shift lever to the neutral position,
and switch the power to
“
ACC
”
. De-
press the clutch pedal, and press the
push-button ignition switch for at least
15 seconds. The engine may start. Only
use this engine start procedure in case
of emergency.
!
CVT models
1. Carry the access key, and sit in the
driver
’
s seat.
2. Apply the parking brake.
3. Shift the select lever in the
“
P
”
posi-
tion. The engine can also start when the
select lever is in the
“
N
”
position, however,
for safety reasons, start in the
“
P
”
position.
4. Depress the brake pedal until the
operation indicator on the push-button
ignition switch turns green. When starting
with the select lever in the
“
N
”
position, the
indicator does not turn green.
5. While depressing the brake pedal,
press the push-button ignition switch.
