Black plate (257,1)
一
般
Model "A1270GE-A" EDITED: 2016/ 3/ 10
Automatic climate control
operation
When this mode is selected, the fan
speed, airflow distribution, air-inlet control,
and air conditioner compressor operation
are automatically controlled. To activate
this mode, perform the following.
NOTE
.
Even when cooling is not necessary,
setting the temperature much lower
than the current outlet air temperature
turns on the air conditioner compres-
sor automatically and the
“
A/C
”
indi-
cator on the control panel illuminates.
.
The air conditioner may not operate
in the following cases:
–
when the cabin temperature is
low
–
when the ambient temperature
decreases close to 0
8
C (32
8
F)
.
The controllable temperature range
may vary depending on the regional
specifications of the vehicle.
1. Press the
“
AUTO
”
button. The indica-
tor
“
FULL AUTO
”
on the display illumi-
nates.
2. Set the preferred temperature using
the temperature control dial.
NOTE
.
If you operate any of the buttons on
the control panel other than the
“
OFF
”
button, rear window defogger button
and temperature control dial(s) during
FULL AUTO mode operation, the
“
FULL
”
indicator on the control panel
will turn off and the
“
AUTO
”
indicator
will remain illuminated. You can then
manually control the system as desired
using the button you operated. To
change the system back to the FULL
AUTO mode, press the
“
AUTO
”
button.
.
When the climate control system
turns off, the air inlet is fixed to the
outside air mode.
To turn off the climate control system,
press the
“
OFF
”
button.
Climate control/Automatic climate control operation
4-5
–
CONTINUED
–
4
