IN-26
Intercooler Water Spray Hose
INTAKE (INDUCTION)
(1) Release the clip by pulling the trim panel - center pillar LWR LH toward you.
(2) Expand the claws of the trim panel - center pillar LWR LH outward, and remove it from the trim panel
- center pillar UPR LH.
CAUTION:
Do not expand the trim panel - center pillar LWR LH excessively. Doing so may damage the trim.
NOTE:
First release the claw located to the front of the vehicle.
17) Release the claws, and remove the cover - catcher LH.
NOTE:
Remove the cover - catcher LH by using a plastic remover.
18) Remove the clips, and remove the trim panel - rear pillar UPR LH.
19) Remove the trim panel - rear pillar LWR LH.
(1) Remove the clips, and turn over the trim panel - trunk side.
(2) Remove the clips, and remove the trim panel - rear pillar LWR LH.
20) Remove the mat - trunk.
21) Remove the trim panel - trunk rear.
(1) Remove the clip.
(2) Release the claws, and remove the trim panel - trunk rear.
22) Remove the clips, and remove the trim panel - trunk side LH.
23) Remove the sub trunk assembly.
24) Remove the intercooler water spray side hose assembly from the rear harness clamp shown in the figure.
AA-14014
Summary of Contents for S209 2019
