Subaru S209 2019, Service Manual

Page: 16 / 297

PI-2
Pre-delivery Inspection
PRE-DELIVERY INSPECTION
1. Pre-delivery Inspection
A: GENERAL DESCRIPTION
The purposes of the pre-delivery inspection (PDI) are as follows.
• Remove the vehicle protective parts for transportation.
• Check that the vehicle or parts before delivery are not damaged during transportation or storage.
• Check that the vehicle after repair is normal.
• Make sure to provide a complete vehicle to customer.
For above reasons, all SOA service center must carry out the PDIs before delivery of vehicle. Besides, all
SOA service center and PDI center check the condition of all vehicles to make sure to take responsibility.
B: PRE-DELIVERY INSPECTION (PDI) PROCEDURE
Static checks just after vehicle receipt
Checks with the engine running
1. ACCESSORY
Check that the following accessories are provided.
• Owner’s manual
• Warranty booklet
• Maintenance note
• Spare key
• Key number plate
• Jack
• Tool set
• Tire repair kit
• Towing hook (eyebolt)
Item Check point
1. Accessory Check that the following accessories are provided.
• Owner’s manual
• Warranty booklet
• Maintenance note
• Spare key
• Key number plate
• Jack
• Tool set
• Tire repair kit
• Towing hook (eyebolt)
• Front under spoiler
Item Check point
2. Intercooler water spray tank Check the water level of the intercooler water spray tank.
3. Intercooler water spray system Check that the intercooler water spray system operates normally.