Subaru S209 2019, Service Manual

Page: 259 / 297

EI-71
Lower Inner Trim
EXTERIOR/INTERIOR TRIM
NOTE:
To facilitate the work, peel off approx. 80 mm (3.15 in) of the backing sheet (d) on vehicle inside and attach
it to the front side. And then peel off approx. 50 mm (1.97 in) of the backing sheet (e) on vehicle outside and
attach it to the front side.
(3) Align the side sill plate - rear to the position of the masking tape applied in step (1).
CAUTION:
• Make sure there are no gaps between the side sill plate - rear and the cover side sill - rear INN.
• If there is a gap, adjust the application position of the side sill plate - rear to the left or right direc-
tion.
(4) Peel off the backing sheet on vehicle inside of the side sill plate - rear.
(A) 80 mm (3.15 in) (B) 50 mm (1.97 in)
(a) Back side (c) Masking tape (e) Backing sheet on vehicle outside
(b) Front side (d) Backing sheet on vehicle inside
(a) Cover side sill - rear INN (b) Side sill plate - rear (c) 3.5 mm (0.14 in)
AA-10132
(a) (b)
(e) (d)
(c)
(A)
(B) (e) (d)
AA-10133
A-A
A
A
(b)
(c)
(a)