Error code
Cause
Solution
128
Installation failed
Perform a factory reset (→P.63) and attempt the update again
(→P.204), or update the map data using a USB memory device
or Wi-Fi network. (→P.202, 203) Then, perform the following
procedure:
Turn the ignition switch to the “LOCK”/“OFF” position → Open the
driver’s side door → Close the door → Wait for 3 minutes or more →
Start the engine.
CAUTION:
When a factory reset is performed, various settings (driver
profile, paired Bluetooth devices, radio presets, audio settings,
etc.) will be reset.
WHAT TO DO IF
244
docstructure.indb 244
2019/05/31 14:17:06