Customizing functions
113
■
How to customize
Operations can be performed when the select
lever is in the
position and the ignition
switch is in the ON position while the vehicle
is parked. However, the Cruise Control Accel-
eration Characteristics and warning volume
can be changed, even while you are driving.
1. Pull the
/
switch toward you to
display the change settings screen.
Pull and hold the
(Info)/SET switch to
change to the settings screen.
2. Pull the
/
switch toward you, select
“EyeSight”, “Screen Settings” or “Warning
Volume”, and pull the
(Info)/SET switch
to confirm.
The system will then switch to the settings
screen.
Operate the following switches according to
the display on the screen.
•
Select:
(Return) switch/
(Send) switch
•
Confirm:
(Info)/SET
switch
●
Driver Assist Indicator
The Driver Assist indicator can be activated (On) or deactivated (Off).
●
Warning Volume
The volume can be set to Max/Mid/Min.
When on the Warning Volume settings screen, if the volume is selected with the
/
switch, 3 short beeps will sound.
NOTE
When “Go Back” is selected, the system will return to the screen 1 level above
the current one.
A
Screen Setting
Settings
Enter
Select
Select
Enter
Select
Select
S03872
Change settings screen
Settings screen
P
B1432BE-A.book 113 ページ ２０２０年８月６日 木曜日 午後１時１２分
Summary of Contents for Crosstrek Hybrid 2021
Page 2: ...B1432BE A book 2...
Page 123: ...123 MEMO B1432BE A book 123...
Page 124: ...124 MEMO B1432BE A book 124...
