Subaru 2016 Outback Owner'S Manual Download Page 94

Page: 94 / 99

Troubleshooting

Adaptive Cruise control cannot be set.

Did you remember to press the

(CRUISE) switch?

If you have not pressed the

(CRUISE) switch,

(Adaptive Cruise

Control) will not be shown.

Is EyeSight operation temporarily stopped?
When EyeSight is temporarily stopped,

is displayed on the multi information

display.
Set cruise control again after the reason for the temporary stop has been cor-
rected.

displayed?

Cruise control cannot be set when

is not displayed. Set cruise control when

is displayed.

is not displayed.

Are the requirements for setting cruise control met?
In any of the following cases,

will not be displayed.

•

The brake pedal is depressed.

•

The vehicle speed is not between approximately 0 MPH (0 km/h) and 90
MPH (145 km/h) (when Adaptive Cruise Control is operating).

•

The vehicle speed is not between approximately 25 MPH (40 km/h) and 90
MPH (145 km/h) (when Conventional Cruise Control is operating).

•

The combination meter indicates a position other than

. (The select

lever or paddle shift switches are manually operated.)

•

The driver’s seatbelt is unfastened.

•

Any door is opened (except the rear gate/trunk).

•

The electronic parking brake is applied (The brake system warning light is
illuminated or flashing.)

•

The vehicle is on a steep grade.

•

The X-mode is turned on. (The X-mode indicator illuminates.)

•

The steering wheel is turned significantly in either direction.

*For details of how to release the Electronic Parking Brake, refer to the

Owner’s Manual for your vehicle.

B2522BE-A.book 93 ページ２０１５年５月１５日　金曜日　午後１２時２２分

Summary of Contents for 2016 Outback




































































































Search results

Summary of Contents for 2016 Outback

Reviews:

Related manuals for 2016 Outback

Brands by name

Popular brands

Subaru 2016 Outback, Owner'S Manual

Search results

Summary of Contents for 2016 Outback

Reviews:

Related manuals for 2016 Outback

Brands by name

Popular brands