manualshive.com logo in svg

Subaru 2016 Outback, Owner'S Manual

Share
Download
Subaru 2016 Outback Owner'S Manual Download Page 39

Adaptive Cruise Control

38

Adaptive Cruise Control is available when the engine is turned on.

■

Setting Adaptive Cruise Control

(1) Setting Adaptive Cruise Control to standby status

Press the 

 (CRUISE) switch. At this time, “

” (Adaptive Cruise Control), your vehi-

cle indicator and the “following distance setting” are displayed on the EyeSight display area
in the multi information display.
The set vehicle speed display will read “- - MPH”.

If the switch is pressed once more, the EyeSight display will turn off. It will also automatically
turn off when the engine is stopped.
To set ready status:

Adaptive Cruise Control can be set when all
of the following conditions are met and 
is displayed on the EyeSight display area.

- All doors (except the rear gate/trunk) are

closed.

- The driver’s seatbelt is fastened.
- The electronic parking brake is not

engaged (The brake system warning light
is turned off.).

- The selector lever is in the 

 position

and the paddle shift is not operated.

- The brake pedal is not depressed.
- EyeSight operation is not temporarily stopped.

⇒

 Refer to page 87.

- The road is not a steep slope.
- The steering wheel has not been turned significantly in either direction.
- X-mode is not turned on.
- The vehicle speed is between approximately 0 MPH (0 km/h) and 90 MPH (145 km/h).

How to use Adaptive Cruise Control

S01985

S01110

S01111

D

B2522BE-A.book  38 ページ  ２０１５年５月１５日　金曜日　午後１２時２２分

Summary of Contents for 2016 Outback




































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands