background image

About EyeSight

10

⇒ 

Continued from previous page

Keep the windshield (outside and inside) clean at all times. When the wind-
shield has become fogged, or it has a dirt or an oil film on it, the stereo
camera may not detect objects accurately and the EyeSight system may
not operate correctly. Never mount any device to the center air vent, as
any airflow change may impact EyeSight performance.

Do not place any stickers or accessories on the windshield (outside or
inside). If you have to do so (for example, legally required or electronic toll
tag), avoid the area directly in front of the camera. Doing so may adversely
affect the field of vision of the stereo camera and can cause improper
operation of the system. For details, contact a SUBARU dealer.

Do not use any glass coating agents or similar substances on the wind-
shield. Doing so may prevent the system from operating correctly.

Do not install a film on the front windshield. The system may not operate
correctly.

If there are scratches or cracks on the front windshield, contact a SUBARU
dealer.

To have the front windshield replaced or repaired, contact a SUBARU
dealer. Do not install a front windshield other than a genuine SUBARU
front windshield. The stereo cameras may not be able to detect objects
accurately and the EyeSight system may not operate properly.

B2522BE-A.book  10 ページ  2015年5月15日 金曜日 午後12時22分

Summary of Contents for 2016 Outback




































































































Reviews: