background image

86

EyeSight malfunction and temporary stop

If a malfunction is detected in the EyeSight system, the indicators in the instrument panel
and the multi information display inform the driver of the malfunction. Check the displayed
contents and take the appropriate action.

Malfunction (including position/angle misalignment of stereo

cameras)

The buzzer sounds 1 short beep and the
EyeSight warning indicator 

 (yellow)

flashes or illuminates. At the same time, the
Pre-Collision Braking System OFF indicator
light and the Lane Departure Warning OFF
indicator light will illuminate. A message will
also be displayed on the multi information
display.

Displayed screen

Cause

Action

An EyeSight malfunction or
position/angle misalign-
ment of stereo cameras has
occurred.

Inspection and adjustment is 
necessary.
Contact your SUBARU 
dealer.

CAUTION

If both the EyeSight warning indicator and the CHECK ENGINE warning
light/malfunction indicator light illuminate at the same time while driving, have
your vehicle checked/repaired by a SUBARU dealer as soon as possible.
EyeSight cannot be used if there is an abnormality with the engine, etc.

 NOTE

If the EyeSight warning indicator illuminated or flashed, stop the vehicle in
a safe location, and after stopping the engine once by turning off the
engine, restart the engine.

If the indicator continues illuminating or flashing even after the engine has
been restarted, the EyeSight system has a malfunction. In this case, all
EyeSight functions will be stopped. Normal driving will still be possible.
However, contact a SUBARU dealer for an inspection.

S01134

S00699

B2522BE-A.book  86 ページ  2015年5月15日 金曜日 午後12時22分

Summary of Contents for 2016 Outback




































































































Reviews: