Subaru 2003 Outback Sport, Owner'S Manual

Page: 259 / 418

IMPREZA(NA) A1850BE-A (ENGLISH)
Starting and operating
7-30
J
To temporarily cancel the cruise con-
trol
There are four ways to cancel the cruise control tem-
porarily:
D
Depress the brake pedal.
D
Pull the control lever in the “CANCEL” direction. (if
so equipped)
D
Depress the clutch pedal (manual transmission
vehicles only).
D
Shift the selector lever into the “N” position (auto-
matic transmission vehicles only).
To resume the cruise control after it has been tem-
porarily canceled and with vehicle speed of about
20 mph (32 km/h) or more, push the control lever
upward in the “ACCEL, RESUME” direction to return
to the original cruising speed automatically.
J
To turn off the cruise control
There are two ways to turn off the cruise control:
D
Push the main switch again.
D
Turn the ignition switch to the “ACC” or “LOCK”
position (but only when the vehicle is completely
stopped).
J
To change the cruising speed
B
To increase the speed (by control lever)
Push the control lever upward in the “ACCEL, RE-
SUME” direction and hold it until the vehicle reaches
the desired speed. Then, release the control lever.
The vehicle speed at that moment will be memo-
rized and treated as the new set speed.
When the difference between the actual vehicle
speed and the set speed is less than 4 mph (6.8
km/h), the set speed can be increased 1 mph (1.6
km/h) each time by pressing the control lever up-
ward in the “ACCEL, RESUME” direction quickly
within 0.5 second.
B
To increase the speed (by accelerator pedal)
1. Depress the accelerator pedal to accelerate the
vehicle to the desired speed.
2. Push the control lever downward in the “SET,
COAST” direction once. Now the desired speed is
set and the vehicle will keep running at that speed
without depressing the accelerator pedal.
NOTE
If the difference between the actual vehicle
speed when the control lever is pushed down-
ward and the speed last time you set is less than