Subaru 2003 Outback Sport, Owner'S Manual

Page: 73 / 418

IMPREZA(NA) A1850BE-A (ENGLISH)
Seat, seatbelt and SRS airbags
1-38
Each lower anchorage is located where the seat
cushion meets the seatback.
1. Use the “ ” marks to locate the two lower an-
chorages (bars) for the position where you want to
install the child restraint system.
2. While following the instructions supplied by the
child restraint system manufacturer, connect the
connectors of the child restraint system to the lower
anchorages.
When the connectors are fastened, make sure that
the adjacent seatbelts are not caught.
If your child restraint system is of a flexible attach-
ment type (which uses tether straps to connect the
child restraint system proper to the lower anchor-
ages), firmly tighten the straps after connecting the
connectors.
3. Connect the top tether hook to the tether anchor-
age and firmly tighten the tether.
For information on how to set the top tether, read the
following “Top tether anchorages”.
4. Before seating a child in the child restraint sys-
tem, try to move seat back and forth to verify that it
is held securely in position.
If you have any question concerning this type of
child restraint system, ask your SUBARU dealer.
WARNING
When you install a child restraint system, fol-
low the manufacturer’s instructions supplied
with it. After installing the child restraint sys-
tem, check to ensure that it is held securely in
position. If it is not held tight and secure, the
danger of your child suffering personal injury
in the event of an accident may be increased.