Subaru 2003 Outback Sport Owner'S Manual Download Page 216

Page: 216 / 418

IMPREZA(NA) A1850BE-A (ENGLISH)

Interior equipment

6-5

– CONTINUED –

Storage compartments

CAUTION

Always keep the storage compartment

closed while driving to reduce the risk of inju-
ry in the event of sudden stops or an accident.

Do not store spray cans, containers with

flammable or corrosive liquids or any other
dangerous items in the storage compartment.

Glove box

1) Lock

2) Unlock

To open the glove compartment, pull the handle. To
close it, push the lid firmly upward.

To lock the glove compartment, insert the key and
turn it clockwise.

Summary of Contents for 2003 Outback Sport



































































































































































































































































































































































































































Search results

Summary of Contents for 2003 Outback Sport

Reviews:

Related manuals for 2003 Outback Sport

Brands by name

Popular brands

Subaru 2003 Outback Sport, Owner'S Manual

Search results

Summary of Contents for 2003 Outback Sport

Reviews:

Related manuals for 2003 Outback Sport

Brands by name

Popular brands