Page 16
3-2
#825309 - Revision A - August, 2014
V-Series Cooktop Hood
V-Series Cooktop Hood
Component Access
COMPONENT ACCESS AND REMOVAL
This section explains how to access and remove components from a Wolf V-Series Hood.
An attempt has been made to arrange these procedures in such a way as to simulate which components would
need to be removed first in order to gain access to the other components. When following a component removal
procedure, it may be necessary to reference another component removal procedure listed earlier in this section.
Note:
Before continuing, please take note of the WARNINGS and CAUTIONS below.
• When working on the Hood and components, be careful when handling sheet metal parts. There may be sharp
edges present.
• Chimney should only be secured at the locations provided for by the Hood. Do Not cement, grout, or silicone the
chimney in any manner. Warranty does not cover removing or reinstalling chimneys attached in this manner.
• TO AVOID ELECTRIC SHOCK. POWER TO HOOD MUST BE DISCONNECTED WHEN EVER SERVICING
AND/OR ACCESSING COMPONENTS AND/OR REMOVING COMPONENTS POWERED BY ELECTRICITY OR
COMPONENTS NEAR OTHER ELECTRICAL COMPONENTS.
• IF IT IS NECESSARY TO REMOVE A HOOD FROM ITS INSTALLATION REMEMBER THAT THE UNITS ARE
HEAVY AND MUST BE LOWERED FROM THE INSTALLATION. MAY REQUIRE TWO MEN.
• REMOVING A UNIT FROM ITS INSTALLATION SHOULD ONLY BE PERFORMED BY AN AUTHORIZED SERV-
ICE TECHNICIAN OR INSTALLER.
