manualshive.com logo in svg

Sub-Zero 424FS/G-2, Service Manual

Share
Download
Sub-Zero 424FS/G-2 Service Manual Download Page 6

Page 6

General Information

Wine Storage 

Wine Storage 

(400-

(400-

2

2

)

)

Series

Series

1-8

#3758410 - Revision C - May,2014

Wine Storage Unit Maximum Temperature

65°

18°

Sub-Zero Wine Storage Temperature Range, Recommended Wine Storage Temperatures
and Recommended Wine Serving Temperatures:

Bordeaux

63°

17°

Red Burgundy

61°

16°

Beaujolais

54°

12°

Sherry

52°

11°

Rosés

48°

9°

Dry White Wines

48°

9°

Champagne

46°

8°

Sweet White Wines

43°

6°

Sparkling Wines

41°

5°

Wine Storage Unit Minimum Temperature

38°

3°

Fahrenheit

Celsius

T

he table below shows the temperature range of the Sub-Zero Wine Storage Units.  This table also shows the rec-

ommended temperatures for

“serving”

wines.  Serving wines at the recommended temperatures will insure that white

wines maintain their lively and interesting taste, and red wines will maintain their scent and flavor.

NOTE:

For “long term storage” of all wines,  the ideal temperature is 55°F / 13°C.

NOTE:

The temperature range in the refrigerator drawer area of the 427R is 34°F / 1°C to 45°F / 7°C

.

Recommended W

ine Serving T

emperatures

Summary of Contents for 424FS/G-2


























































Reviews:

No comments

Brands by name

Popular brands

Load more brands