ionTig 200 AC/DC
Copyright © Mundaka Welding & Gases, Inc.
14
When WSME welding machines are operated in HF ignition method, the ignition spark can
cause interferences in equipment near the welding machine. Be sure to take specially safety
precautions or shielding measures.
4. Operation
4.1 Layout for the panel
WSME-200
DIGITAL CONTROL
AC frequency
Balance
AC
～
DC
DC
AC
～
Hz
%
S
V
A
AC/DC PULSED TIG WELDER
1
～
220V
ON
OFF
1
2
3
4
5
6
7
8
(1) Positive output: The welder’s positive polarity output.
(2) Aero socket: Is connected to torch switch control wire. (It has 14 leads and lead 8 - lead 9
are connected to torch switch control wire).
(3) Negative output: The welder’s negative polarity output.
(4) Shield gas connector: Is connected to the gas input pipe of torch.
(5) Power source switch: Switch to “ON”, the welder is turned on, while switch to “OFF”, the
welder is turned off.
(6) Power source input: To connect power source.
