ionTig 200 AC/DC
Copyright © Mundaka Welding & Gases, Inc.
20
After the start of welding, the left-hand display shows the present actual value of the welding current.
The control panel indicates which position has been reached in the welding process by brightening the
light.
NOTE:
Only “Parameter selection keys” and “Adjusting dial” can be used in the welding process.
Only “Rod electrode welding key”, “Adjusting dial” and “AC/DC selecting key” can be used on MMA
mode.
4.3 Remote control
1-3 CURRENT SET
:
They are factory set, can’t be changed. If they are changed, the welder may
be broken.
4 FACTORY TEST
:
When it is ON, the welder is on debug state.
5 FOOT_REMOTE BOX SELECT
:
When it is ON, the pedal control can be used
;
When it is OFF,
the remote box can be used. Gun switch control current can be used both ON and OFF.
4.3.1 Pedal switch control
When plug the fourteen-lead aero-socket of pedal switch in it. Welder will identify the pedal
switch, the welding current knob on the front panel will can’t use
,
and only 2T can be
selected.
When use the adjustment knob of max-welding current beside the pedal, can set the
max-current you want.
The eighth and ninth of the fourteen-lead aero-socket is gun switch; the first and second of