StyleWell WHEATON 1007519970/320010627/611768149018/23WM90536-PC78 Use And Care Manual Download

Page: 22 / 25

PROBLEM

ROOT CAUSE

CORRECTIVE ACTION

The remote control is not working.

There are no batteries.

Change the remote batteries.

The signal is poor.

Operate remote transmitter at a slow

measured pace.

Press the remote control buttons with an

even motion and gentle pressure. Repeat-

edly pressing buttons in rapid succession may

cause the transmitter to malfunction.

The remote is too far from the heater.

Operate the remote at a distance less than

20 ft from the front of the appliance; point the

remote at the control panel.

Troubleshooting

Summary of Contents for WHEATON 1007519970/320010627/611768149018/23WM90536-PC78


























Search results

Summary of Contents for WHEATON 1007519970/320010627/611768149018/23WM90536-PC78

Reviews:

Related manuals for WHEATON 1007519970/320010627/611768149018/23WM90536-PC78

Brands by name

Popular brands

StyleWell WHEATON 1007519970/320010627/611768149018/23WM90536-PC78, Use And Care Manual

Search results

Summary of Contents for WHEATON 1007519970/320010627/611768149018/23WM90536-PC78

Reviews:

Related manuals for WHEATON 1007519970/320010627/611768149018/23WM90536-PC78

Brands by name

Popular brands