10
Assembly (continued)
A
I
fastener
8
7
Align the pre-installed hardware on the edges of the
Base Assembly (A and I) with the pre-drilled holes on
the Left and Right Side Panels (B and C) as shown in
the diagram.
Place Cam Bolt connectors into the pre-drilled holes
and tighten with a Phillips screwdriver.
Align the Cam Lock (DD) on the edge of Base Back
Rail (I) with the pre-drilled holes on Bottom Shelf
(A).
Secure the Base Back Rail (I) in place by tightening
the fasteners with a Phillips screwdriver as shown.
Attaching the sides to the base
Attaching the base back rail
9
Attach the front assembly to the sides by aligning the
pre-installed hardware on the edges of the side and
bottom assembly with the pre-drilled holes on front
assembly.
Secure the side and bottom assembly to the front
assembly by tightening the fasteners with a Phillips
screwdriver as shown.
Attaching the front and sides
B
A
C
Cam Bolt connectors
C
B
fastener
bottom assembly
front assembly
Summary of Contents for WHEATON 1007519970/320010627/611768149018/23WM90536-PC78
Page 24: ...24 Notes ...
