manualshive.com logo in svg

StyleWell WHEATON 1007519970/320010627/611768149018/23WM90536-PC78, Use And Care Manual

Share
Download
StyleWell WHEATON 1007519970/320010627/611768149018/23WM90536-PC78 Use And Care Manual Download Page 15

15

HomeDepot.com

 

 

Please contact 1-877-527-0313 for further assistance.

21

22

20

Locate the Electric Fireplace Back Panel (M).

Only slightly bend the wallpaper and fit it into the back of the 
fireplace.

Note that this back panel is reversible and can be placed with 
either side facing the fireplace insert for a customizable look.

Place the Back Panel Brackets (HH) between the Fireplace Back 
Panel (M) and the grooves of the assembly as shown.

Fasten each Back Panel Bracket (HH) using Screws (GG). Repeat 
until all brackets are in place as indicated by the diagram.

Placing the fireplace background

Securing the fireplace background

Connect Key Button Connection Wire to heater.

Insert the Ember Bed Connection Wire into the heater.

Connecting the fireplace wiring

Assembly (continued)

HH

GG

Key Button 

Connection Wire

Ember Bed 

Connection Wire

M

M

Summary of Contents for WHEATON 1007519970/320010627/611768149018/23WM90536-PC78


























Reviews:

No comments

Brands by name

Popular brands

Load more brands