32
Fig. 3
3. Drill two holes (5/16 in.) in the corner
where the fireplace is to be displayed.
Drill the first hole 34
5/16
in. from the
ground up; and the second hole
36
1/16
in. from the ground up as shown
in Fig. 3. Put the wall anchors (DD)
in the holes by pinching the anchor tabs
together.
Hardware Used
Wall Anchors
x 2
4. Attach the triangular wood block to the
holes drilled in step 4 with ST4.8 screw -
2
3/8
in. (AA) as shown in Fig. 4. This
block is used to support the top triangle
panel.
Hardware Used
AA
ST4.8 Screw - 2
3/8
in.
x 2
DD
Push fireplace into corner so that the top
triangle panel is resting on top of the
wood block.
Fig. 4
Mitered Corner
Joints
Baseboard
Mitered Corner
Joints
