STX Mega-Steam 4000 SX2, Instruction Manual

Page: 17 / 20

- 15 -
TROUBLE SHOOTING
PROBLEM POSSIBLE CAUSE SOLUTION
The red LED
fails to light.
The appliance is not
plugged into an outlet.
The appliance is not
switched on.
The outlet is faulty.
The power cord is
damaged.
Insert the plug into an outlet
and turn the unit on.
Turn the unit on.
Plug the steamer into
different outlet.
Have the power cord
repaired.
No steam is
emitting when
operating.
The child lock is
engaged.
The water tank is
empty.
Disengage the child lock.
Fill the tank with no more
than 1.5 liters of water.
Very limited
steam flow.
The steam flow
control knob is set to
minimal or low setting.
Missing or damaged
O-rings.
Turn the steam flow control
to the desired level of steam
flow.
Check and replace any
damaged or missing O-rings.
Prolonged
time to heat
up.
The water tank has
been clogged with
calcium.
Remove the calcium build
up and always used distilled
water to prevent calcium
damage.