- 14 -
CLEANING
Allow 15-30 minutes for the unit to cool when steaming is complete.
This cooling period is necessary for operator safety.
The safety cap
WILL NOT
open until the tank has cooled completely. After this cooling
period, squeeze the trigger to release any additional pressure prior to
unscrewing the safety cap.
Surface Cleaning:
1. Clean the housing of the steam cleaner with a dampened cloth.
2. Do not use cleaning agents, abrasives or alcohol on the housing.
3.
Wipe off any excess moisture with a dry cloth.
Tank Maintenance:
1. Clean the tank every 3 months.
2.
Remove the safety cap.
3. Fill the tank with clean distilled water, rinse thoroughly, and drain the
tank. Repeat this process 2 or 3 times for best results.
4. Allow the tank to dry completely prior to replacing the safety cap.
STORAGE
•
Always ensure that the unit is in the OFF power setting and
disconnect the steam cleaner from the power source prior to any
cleaning or storage.
•
Prior to cleaning or storage, squeeze the trigger on the steam gun
to release any pressure built up inside of the boiler tank.
•
Allow proper cooling time of 15 to 30 minutes if the steam cleaner
has been used recently.
•
Unscrew the safety cap carefully at all times to prevent inadvertent
hot steam release and scalding.
•
Always allow the steam cleaner to cool down and dry completely
before storing.
•
Keep out of the reach of children at all times.
Summary of Contents for Mega-Steam 4000 SX2
Page 1: ...INSTRUCTION MANUAL...
Page 2: ......
