13
BACKWARD MODE (synced time shown)
TRIGGER:
Trigger source to start delay read fro the top. Useful for timed reverse delays.
•
OFF - Reverse buffer reads are running free.
•
BAR – Delay buffer writes start at every new bar from top.
•
ENV1/2 – Delay buffer writes start at every envelope trigger [Envelope follower is in
GATE mode and the envelope level exceeds the threshold level].
Note: Reverse buffer reads are delayed for the selected delay time. That means the buffer has to be filled with the delay
length first before the read starts. In case of e.g. a delay length of 1/16
th
the reverse buffer read starts 1/16
th
after the
written input sample and is read from the buffer head in reverse. The first input sample is therefore reached after 2/16
th
.
So the attack of a percussive sound will be heard at the doubled amount of the selected delay time.
POSITION
:
Delay buffer read position
X-FADE:
Crossfade time from top/end of buffer frames. [10ms - 1000ms]
LOPASS:
Cutoff frequency of the delay output Lo-pass filter [200Hz - 20000Hz]
GRAIN MODE (synced time shown)
SMOOTH:
Smoothing of grains. AUTO sets a pre-calculated time which fits to the linked parameters.
[AUTO,
0ms – 50ms
]
POSITION:
Read position relative to the delay time buffer start. 0% is head, 100% is tail of the buffer. [0% - 100%]
SPEED:
Playback speed of delay buffer. -100% results in one octave lower, +100% in one octave higher pitch.
[-100% - +100%]
SIZE
:
Size of grains. [5ms – 400ms]
©
2020-2021
doc version 1.2.0
