12
FORWARD MODE (free time mode)
ON:
Enables/Disables the delay module.
TAP/TIME
SELECT:
['
TAP
' Dots - In synced mode] Sets the Delay time to the selected note length multiplied with the upper
circle number. Left and right channel can have individual settings.
['
TIME
' Slider - In free mode] Sets left and right Delay time with the horizontal faders.
TIMEBASE:
Delay time base. [Note length of
1/16
th
, 1/32
nd
, 1/64
th
, 1/8
th
triplet, 1/16
th
triplet, 1/32
nd
triplet.
Option “Milliseconds”
, changes to non synced display]. (
All four delay modes)
MODE:
Main Delay mode. FORWARD / BACKWARD / GRAIN / TAP
LINK:
Links left and right channel time settings. (
Forward/Backward and Grain mode)
.
ROUTING:
Selects the feedback and output routing of the delay (forward and backward mode).
•
DUAL MONO: Left and right input go to own input, feedback and output.
•
LEFT PING PONG: Left input goes into left input and is feed back into the right channel. Right
feedback goes into the left channel afterwards.
•
MONO LEFT PING PONG: Same as LEFT PING PONG, just with the mono input signal.
•
RIGHT PING PONG: Right input goes into right input and is feed back into the left channel.
Left feedback goes into the right channel afterwards.
•
MONO RIGTH PING PONG: Same as RIGHT PING PONG, just with the mono input signal.
•
LEFT/RIGHT PING PONG: Left and right channel go into own input and feed back to each
other.
•
MIX: Left and right channel go into own input and feedback to both channels.
•
MONO LEFT: Only left channel is processed and routed to both outputs.
•
MONO RIGHT: Only right channel is processed and routed to both outputs.
FEEDBACK
MODE:
Proportional/Linear feedback mode.
In proportional mode left and right channels have the same release time when different delay
times are set. (
Only active in DUAL MONO mode)
.
SPREAD:
Spreads left and right delay times in milliseconds. Opposite to the offset delay time the spread time
sums up every feedback loop. [-20ms - +20ms]
HIPASS
:
Cutoff frequency of the delay output Hi-pass filter [20Hz - 3000Hz]
LOPASS:
Cutoff frequency of the delay output Lo-pass filter [200Hz - 20000Hz]
©
2020-2021
doc version 1.2.0
