18
c
b
a
5
6
7
8
9
10
11
Stûv 30-up - installation [en] - 0209
SN 68 719 > ...
If the stove is fed with outside air
via a flue coming from behind the
stove
Assemble at the back. Connect the
flexible duct [photo 5] and check
the valve is working correctly before
installing the stove on its console!
If the stove is fed with outside air
via a flue coming from beneath
the stove
An air inlet chamber is required
[photo 6-a]. Attach the support
for this chamber under the console
[photo 6-b].
Positioning the stove
Remove the 2 screws [photo 7-c]
holding the stove on its palette.
When moving the stove, carry it by
the 2 panel supports and the smoke
outlet [photo 8]. Using a pallet loader
or a lift hand truck, place the stove on
the console.
Place the bottom of the stove on
the lower lugs [photo 9]. Lower
fully at the back. Check the upper
attachment: The stove’s eyelets must
be properly positioned onto the lugs
of the console. The conical part of
the lugs must be completely visible.
[photo 10] If necessary, slightly bend
the ends to lower the eyelets.
To ensure correct positioning, re-screw
the 2 M5 screws with hexagonal
heads to secure the stove on the
console beneath the stove.
