DCX.Server/DCX.Client/DCX.NC
www.stute-engineering.de
C
h
a
p
ter
:
DC
X
.N
C
c
o
n
tro
ller
2
4
5
DCX.NC controller
Control your DCX2496 direct from your tablet or mobile
phone, without a MS-Windows computer for the DCX.Server
software.
Technical features
Plug & Play DCX.Server
Network connection: LAN
Small size 12x12x2.5cm
Note: The DCX.NC controller needs approx. 50 seconds to be active. Connection tries before
the system get active, will be ignored.
5.1
Connectors
1
Power switch
Power on: Push the button. The blue in
the front of the controller glows
Power off: Use the shutdown function of
the DCX.Client. In error cases hold the
button until the blue led is switched off.
2
Power supply connector
Connect the delivered power supply
with the connector
3
USB port: Connect the delivered USB-
RS232 interface with this port
4
HDMI output (optional)
Not used
5
LAN network interface (plug for a LAN
cable)
6
Additional USB ports
Not used
Attention: Do not switch off the controller during an established connection to the DCX.Client!
Disconnect the USB-RS232 interface only in the switched off status. Otherwise a reboot of the
DCX.NC system is needed!
5.2
LAN connection
The system is pre-configured to work with a wired network connection. Connect the controller
with your network router (like Fritzbox) via a LAN cable. The controller gets the IP address from
your network router via DHCP.
