Stulz Tel-Air-2 Series, Operating Instructions Manual

Page: 9 / 72

E/0618/35A/9
This concerns the installation, the operation and the repeated inspection:
Installation:
according to EN 378
Operation: Determination of emergency measures (accidents, malfunctions)
Creation of an abbreviated instruction and notification (template page)
a. A unit protocol must be kept
b. To be stored in the proximity of the unit
c. Access for competent staff in case of repairs and repeated
inspection must be ensured.
Repeated inspection: according to EN 378. The operator is responsible for the execution.
The operator must ensure that all maintenance, inspection and assembly work is carried out by
authorised and qualified specialist staff who have made an in-depth study of the operating
instructions.
It is absolutely essential to comply with the procedure for shutting down the system described in
the operating instructions. Before maintenance work, the unit must be switched off at the main
switch and a warning sign displayed to prevent unintentional switching-on.
Efficiency of safety devices must be kept during the whole life cycle of the unit. In order to
perform this task, please follow the prescription given in Chapter 9.
First aid measures

If health problems occur during or after handling fluorinated hydrocarbons, a doctor is to be
consulted immediately. The doctor is to be informed that the work involved the use of
fluorinated hydrocarbons.

In the case of acute effects, the casualty is to be brought into the fresh air as quickly as
possible.

The casualty must never be left unsupervised.

If the casualty is not breathing, initiate mouth-to-mouth resuscitation immediately.

If the casualty is unconscious or very dazed he or she must not be given any liquid.

Splashes of fluorinated hydrocarbons in the eyes can be removed by an assistant by blowing
air or using a fan. Then rinse with water.

Independent conversion and manufacture of replacement parts.

The system may only be converted or modified after consultation with STULZ. Original
replacement parts and replacement parts/accessories authorized by STULZ are an aid to
safety.
Independent conversion and manufacture of replacement parts
The system may only be converted or modified after consultation with STULZ. Original
replacement parts
and replacement parts/accessories authorized by STULZ are an aid to safety.
Unacceptable operating methods
The operating safety of the system is only guaranteed when it is used as intended. The limit
values stipulated in the technical data must not be exceeded under any circumstances.