19
Series GEN 2 Ultrasonic Humidifier IOM Manual
Maintenance Items and Tools
Item
Cycle
Required Tools
Routine Maintenance
Check water tank
interior, mist outlet
and electrical parts.
Once a month (or as required) if
environment is dusty or water supply
quality is poor.
Adjustable
wrenches (2)
Phillips screwdriver
5.5 mm nut driver
Soft cleaning cloth
Small brush
Diagonal wire cutter
Visually inspect water
supply strainer/flow
regulator.
Inspect/clean every 3 months. Replace as
necessary.
Replacing Parts
Replacing
Temperature Sensor.
If damaged or upon failure.
Replacing transducer.
After about 10,000 to 15,000 hours of
operation.
Replacing nebulizer
print plate.
If damaged or upon failure. Also
recommended when replacing transducer.
Replacing water
supply solenoid valve.
If damaged or upon failure.
Replacing float
switches.
Replacing level control
board.
Summary of Contents for DAH
Page 41: ...Series GEN 2 Ultrasonic ...