66
EN/09.2019/G41 © STULZ GmbH – all rights reserved
cybercool 2 screw original insTrUcTions
Insertion for the power
supply cable
In the standard version the power supply cables
must be introduced into the electric cabinet from
the bottom. As an option you can introduce the
power supply cables from the side.
Bottom view
Front side, electric cabinet doors
Entrance area for power supply
Grounding point
at the chiller frame
Connection of control lines (optional)
If the chiller shall be connected to other Stulz units by the IO bus, to a BMS or contains opional extensions, you
must route control lines and connect them in the electric cabinet of the chiller.
• route the control lines in the unit and fix them at the unit frame.
• route the control lines into the electrical cabinet from below and connect them in accordance with the wiring
diagram (part of the unit documents).
• establish an effective earthing to the unit frame.
