7
AIR BOOSTER 2
© STULZ SpA . – all rights reserved EN/10.2018/IT30I
2. Safety directions
These operating instructions contain basic information which is to be complied with for installation,
operation and maintenance. They must therefore be read and complied with by the fitter and the
responsible trained staff/operators before assembly and commissioning. They must be permanently
available at the place where the system is used.
2.1. Introduction
This Air Booster 2 unit has been designed and built for a professional use according to applicable
regulations. Please check the complete list of applicable regulations in the attached CE and UL
conformity declaration.
The unit is in conformity with the following CE Directives:
• EN61000-6-2 and EN61000-6-3 - Electromagnetic compatibility
• EN60335 Safety of electrical appliances
It's necessary to respect the regulations of the Country where the product is installed.
2.2. General rules
DANGER
• Works have to be carried out by competent staff only.
• Observance of regulations for accident prevention.
• Stay out of danger when lifting and setting off the unit.
• Safety devices may not be bypassed.
• Respect the corresponding EN and IEC standards for the electric connection of the unit and
observe the conditions of power supply companies.
• Switch off the voltage from the unit when working on it.
ATTENTION
• Observe the national regulations of the country where the unit will be installed.
• For transport, installation, either ordinary or extraordinary maintenance, operators and
maintenance people must wear individual protection devices (i.e. gloves, glasses, helmet,
shoes), according to the indications of safety manager and applicable regulations.
• The unit may only be used to cool according to the STULZ specification.
• Before any maintenance operation, read and follow instructions in the corresponding chapter.
INFORMATION
• Any special opening tools have to be placed in a visible location nearby the unit.
