6
AIR BOOSTER 2
EN/10.2018/IT30I © STULZ SpA – all rights reserved
1. Introduction
This manual reflects the state of the art existing at the time the product is marketed and shall not be
considered unsuitable merely because it has not been updated following developments in design
and manufacturing methods. Air Booster 2 units are meant to supply a suitable flow of cold air to all
servers to ensure their reliability and optimum working conditions.
Air Boosters are a solution for server rooms whose original layout, load distribution or pressure
conditions in the raised floor have been modified, for example, by additional installations. In these
cases, Air Boosters can be used to adapt the air distribution to the new requirements.
These operating instructions are intended for the following authorized personnel:
• USER: he must know and apply the safety directions and the instructions contained in the present
manual, for correct use of the unit.
• INSTALLER: The unit must be installed that the airflow is directed to the server racks. In doing so,
ensure that installation is in compliance with local safety regulations and instructions contained in
the present manual.
• MAINTENANCE TECHNICIAN: he's a technician authorized by the manufacturer for the start-up
of the unit, technical assistance, ordinary and extraordinary maintenance, reparations.
The qualified personnel consists of professional figures authorized by the safety responsible to
do the activities listed above, due to their training, education, experiences, as well as their specific
knowledge of safety work rules and injury prevention.
INFORMATION
The manufacturer is not responsible for an misuse of the unit, as well as for non-authorized
modifications and for the inobservance of instructions on this manual. The occurring of any of
the conditions above immediately invalidates guarantee coverage for the product.
This manual must be kept by the customer and made available to the installation, commissioning,
use and maintenance personnel.
1.1. Symbols used in this manual
DANGER
RISK OF INJURY FOR OPERATOR AND
POSSIBILITY OF DAMAGING THE UNIT
ATTENTION
INFORMATION OR WARNING OF CAUTION
IN CARRYING OUT A PROCEDURE
INFORMATION
IMPORTANT INFORMATION
1.2. Attachments
The following document is attached to this manual, as its integral part:
• Use and maintenance manual part 2, which contains the electrical drawing and the conformity
declaration UL/CE of the unit.
