10
AIR BOOSTER 2
EN/10.2018/IT30I © STULZ SpA – all rights reserved
2.5. Intended and non-intended use
Intended use
The Air-Booster2 is used to control airflow and is designed for indoor installation.
Any use beyond this is not deemed to be use as intended. STULZ is not liable for any damage
resulting from such misuse. The operator alone bears the risk.
INFORMATION
The use of Air Booster 2 for hotspot cooling requires that the airflow provided by the air
conditioners is sufficient for the entire room. To make this sure we recommend the use of a
raised floor pressure management.
DANGER
The units may not be used or transported in a position other than that for which they have been
designed. STULZ declines all liability deriving from failure to observe the above.
Non-intended use
The unit cannot be installed in the following areas:
• With strong heat radiation;
• With strong magnetic fields;
• With free flames;
• With fire risk;
• With inflammable products;
• With explosive atmosphere;
• With saline atmosphere;
• With aggressive atmosphere.
For any doubt, please consult the manufacturer.
3. Handling and storage
3.1. Unit receipt
STULZ products are delivered ex-works. All units have been individually inspected in all their
components and been carefully packaged before the delivery. Immediately inspect the unit upon
receipt of the goods.
• The delivery note can be found on the A/C unit when delivered.
• The shipment is make ex works, in case of shipment damages, please assert your claim towards
the carrier.
• Hidden damage, that are verified after removal the packing, must always be notified to the shipper
by registered letter within 8 days of receipt of the goods.
• Before throwing the packaging away check that it does not contain any documents or parts of the
machine.
INFORMAZIONI
When delivery is accepted, the unit is to be checked against the delivery note for completeness
and checked for external damage which is to be recorded on the consignment note in the
presence of the freight forwarder.
