Studiomaster Powerhouse 1000X-10, User Manual

Page: 7 / 28

Controls & Features - Front Panel
Stereo Channels (not fitted on model 10R)
17 INPUTS
Two ¼” TRS jack sockets for balanced or unbalanced stereo line level
signals. For mono operation use only the LEFT input.
Can be wired for balanced or unbalanced use.
18 GAIN control
Adjusts the incoming signal to match the internal operating level of the
Powerhouse for optimum performance.
19 HF control
High frequency control providing 15dB of cut and boost at 12kHz
20 MID control
High mid frequency control providing 15dB of cut and boost at 2.5kHz
21 LO control
Low frequency control providing 15dB of cut and boost at 60Hz
22 MON control
An auxiliary send from the channel routed to the MON fader and then
MON SEND output. An independent mix of all channels can be
created to supply external equipment such as stage monitors. The
source of the signal to the control is set by the PRE switch, see
section 23.
23 PRE-EQ button
In the up position the signal to the MON control is after (or post)
channel fader. Any movement of the channel fader will also change the
signal to the MON control. This is useful when routing the MON output
to external effects processors.
In the down, PRE EQ position, the signal to the MON control is before
(or pre) the channel fader, and before (or pre) the EQ section (HF,
MID, LO). Any movement of the fader will now not change the signal to
the MON control. Also any change to the EQ controls will not change
the signal to the MON control.
This is useful when routing the MON output signal to stage monitors.
24 AUX/DSP control
An auxiliary send to the on board effects processor and to the AUX
SEND output socket. The signal is derived after (post) the channel
fader and allows an independent mix of each channel to the onboard
effects processor. The AUX SEND output can be useful for use with
external effects processors.
25 BAL control
Adjusts the balance of the stereo signal between the left & right MAIN
MIX. In the centre position the signals to the left & right MAIN MIX are
equal. When the channel is used with a mono signal the BAL control
works like a PAN control.
5
17
18
19
20
21
23
22
25
24
EXPECT THE BEST EXPECT THE BEST
- +
- +
- +
0 10
0 10
L R
LO
60Hz
MON
AUX/
DSP
0dB
MID
HI
12K
2.5K
GAIN
PRE EQ
8
LEFT
RIGHT
BAL