STUDIO DUE CityColor400, User Manual

Page: 5 / 20

... 4 ...
MAIN POWER PG
CABLE SIZE Ø 6 - 12mm
DATA LABEL
DMX PG
CABLE SIZE Ø 3 - 6.5mm
CONNECTION BOARD (pict.2)
INSIDE THE BOX
DMX CONNECTOR
MAIN POWER CONNECTOR
N=NEUTRAL - GND=HEART -PH=LIVE
FUSES
pict.2
PIN WIRE SIGNAL
1 SHIELD GROUND/RETURN/OV
2 INNER CONDUCTOR DATA COMPLEMENT ( -, INVERTED)
3 INNER CONDUCTOR DATA COMPLEMENT ( -, NOT INVERTED)
MAIN POWER AND DMX CONNECTION
1) Disconnect power before lamp’s replacement or servicing (service personnel)
1) Open the rear box cover.
• The fixture can be equipped for 200/208/230/240Vac, 50Hz main voltage (pict.1a/1b). On request 60Hz.
3) Insert the main power cable into the PG (pic.3), connect the cable to the main power connector (pic2) and tighten the PG.
3) If necessary (synchro-mode), insert the the DMX cables into the PG (pic.3), connect the cables to the DMX connector (pic2)
and tighten the PG.
4) Close the box cover with care, pict.3.
BOX COVER
pict.3