STUDIO DUE CityColor400, User Manual

Page: 7 / 20

... 6 ...
pict.8
On the control panel of the CityColor (pict.8) you can find, besides the display, the leds and the buttons to use to set the spot.
LED
• “DMX” led flashing: DMX input present
off: no DMX input
• ”LAMP” led flashing: the lamp switching off is remotely controlled
off: lamp switched on
• ”DIMMER” led flashing: the lamp is 33% dimmered
off: lamp switched on
BUTTONS
Four buttons are used to programme the spot:
• MENU to select the programming options
• DOWN to go backward in the selected options
• UP to go forward in the selected options
• ENTER to confirm the selected options
DISPLAY
Shows the various menus and the selected options.
CONTROL PANEL
Addr
NChn
Test
FLIP
Rset
Mode
LHrs
FHrs
SUMMARY OF THE PROGRAMMING FUNCTIONS OF THE CITYCOLOR
About twenty seconds after the switching on, the number of the software version will be shown on the display in “X_00” format.
Afterwards the first of the eight available menus will appear:
Addr to assign the DMX-512 address
Mode DMX512 mode, master with pre-set selection, slave
LHrS lamp working hours
FHrS fixture total working hours
nChn channels number
teSt auto-test
FLIP display inversion
rSEt reset of the spot
To select any of the given options, press the MENU button up to when the required one is shown.
Addr (Address)
To visualise the DMX address press ENTER.
To modify the address press Down and Up buttons and, once the required address has been selected, press and keep ENTER pressed
up to when the display stops flashing (it flashes to indicate that the selected option is different from the pre-set one). To go back to
the options without making any change, press the MENU button.
Mode (Mode)
To visualise this mode press ENTER.
Use Down and Up buttons to change the mode and, once the required one has been selected, press and keep ENTER pressed up
to when the display stops flashing (it flashes to indicate that the selected option is dif fer ent from the pre-set one). The available
op tions are: no (normal) for the functioning in DMX reception; Pr01…Pr15 (pre-set 01…15) for the master functioning with the re-
spec tive game, SL (slave) for the func tion ing as slave. To go back to the op tions with out any change, press the MENU but ton.