Studer SW V4.0 OnAir 1000, Operating And Service Instructions

Page: 32 / 361

OnAir 1000 Digital Mixing Console
2-4 General
SW V 4.0 Date printed: 23.10.03
Analog Outputs Analog outputs are transformer-balanced with XLR connectors.
Output level +4 to +24 dBu @ R
L
= 100 k
Ω
;
+4 to +23 dBu @ R
L
= 300
Ω
D/A converter 24 bit (Delta-Sigma, 128 × oversampling)
Dynamics typ. 101 dB (unweighted)
THD+N < –90 dB
FS
@ 1 kHz, –1 dB
FS
Frequency response ±0.2 dB
Output impedance < 40
Ω
Digital Outputs Digital outputs are equipped with two independent outputs according to the
AES/EBU standard (AES3-1992). On each of these outputs, the same signal is fed
to two XLR sockets with individual buffers.
Output level 2 to 5 V
Output impedance 110
Ω
Equalizer Treble control (High) 5 kHz/10 kHz: ±15 dB (depending on Customer Code setting; refer to
11.2.11
)
Equalizer (Mid) 200 Hz to 10 kHz: ±15 dB
Bass control (Low) 200 Hz/400 Hz: ±15 dB
Crosstalk Attenuation
Between channels > 90 dB
Input fader attenuation > 100 dB
Power Supply Redundant power supply available on request.
Mains voltage 100 to 240 V, 50/60 Hz (auto-ranging)
Power consumption 130 VA typ.
DC operation 24 V
DC
+15/–10 %; typ. 5 A @ 24
V
Note: The abovementioned values are typical values; in an individual case, the
values may differ. We reserve the right to make changes as technological
progress may warrant.