Transport, Storage and Disposal
3
Layout and Function
3.1
Type plate
P T M C2
D r u ck sensor
M ess b e r e i c h 0 - 10 b a r
18 - 30 V D C
I d . N o .
140557
A n sc h l u s s
PP DN 2 5
M a t e r i a l
P P
EP D M
1304-05371
1
2
3
4
5
6
4-20mA 2-Leiter
Fig. 1
Type plate
1
Device type
2
Pressure measurement range
3
Output
4
Connection (material and nominal diameter)
5
Gasket material
6
ID number
Device types
•
PTM C2 – Standard, current output
3.2
Description
The device measures the pressure of a liquid medium. It trans-
mits the measured value via a current output.
3.3
Layout
3.3.1
Layout
2
3
1
Fig. 2
Layout
1
Plug connector
2
Sensor housing
3
Process connection
4
Transport, Storage and
Disposal
4.1
Unpacking and inspection on delivery
1. Unpack the device when received and inspect it for trans-
port damage and completeness.
2. Check that the information on the type plate agrees with
the order/design data.
3. Report any transport damage to the manufacturer immedi-
ately.
4. If
fi
tted immediately:
Dispose of packaging material
according to local regulations.
–
If
fi
tted at a later point: leave device in its original pack-
aging.
4.2
Transportation
Device should preferably be transported in the original
packaging.
4.3
Storage
NOTE
Material damage due to inappropriate storage!
Store the device properly.
1. Make sure the storage room meets the following condi-
tions:
–
Dry
–
Frost-free
–
Vibration-free
–
Not in direct sunlight
–
Storage tempe10 °C to +60 °C
2. Device should preferably be stored in the original packag-
ing.
300 196
BA-2016.11.24 EN
PTM C2
5
